豫信致诚机械设备有限公司，地址：中站李封南会253号。 公司专业经营(广西河池) 本地 广西河池边沟滑模机。欢迎新老客户来我公司洽谈。 我们以“优良的品质、优惠的价格、优质的服务”赢得了新老客户的信赖和支持，在业界树立起良好的信誉和口碑。 在此，公司经理携全体员工，将凭借良好的信誉，雄厚的实力，优质的产品，低廉的价格服务于广大用户.谨向对公司一贯给予关怀、支持和帮助的新老朋友和广大客户表示衷心的感谢！并真诚希望与之建立长期的合作关系，互惠互利，共求发展。
软管泵的独到之处：没有其它泵种比软管泵具有更好的自吸能力，几乎可以产生的真空来吸液；输送含气液、泡沫液而无气阻；输送高粘度、剪切敏感性介质也是强项；每转固定的排量而与出口压力无关。
Uniqueness of the hose pump: no other pump has better self-priming ability than the hose pump, and can almost generate vacuum to suck liquid; convey gas-liquid and foam liquid without air resistance; convey high viscosity, shear Cutting sensitive media is also a strength; a fixed displacement per revolution is independent of outlet pressure.
工业软管泵不锈钢齿轮泵，可输送非润滑油饮料低腐蚀性液体，配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差，一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”，则必须是下一级齿轮泵的止回阀或控制阀。移动固定后，周围工作人员可恢复手术。
Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.
软管泵是由泵壳、转子体、机座、软管、减速电机以及电控系统等部分组成。转子体旋转，转子体上的一对压辊沿着一根特制的胶管旋转，压辊与泵壳产生的挤压力将胶管压扁，在管子自身弹性和侧导辊的作用下，通过恢复原状产生的真空吸入物料，物料从管内排出，这样往复循环。
The hose pump is composed of pump casing, rotor body, frame, hose, reduction motor and electronic control system. The rotor body rotates, and a pair of pressure rollers on the rotor body rotates along a special rubber hose. The squeezing force generated by the pressure roller and the pump casing will flatten the rubber hose. The elasticity of the tube and the side guide rollers restore the The vacuum produced by the original state sucks the material, and the material is discharged from the tube, so as to reciprocate.
